“Spinfishing” for Winter Blackmouth
Updated: Feb 20
So how do you find Puget Sound winter blackmouth? The answer is don’t look for the blackmouth but rather look for what attracts blackmouth.
Blackmouth are a delayed released hatchery king salmon that don’t migrate to Alaska but instead inhabits the waters of Puget Sound after being released. The name blackmouth comes from the black gumline that identifies it as a resident chinook salmon. Blackmouth range from the legal size of 22 inches up to fish taken in the upper teens.
In the many years I have fished Puget Sound I have found that Puget Sound blackmouth relate to three things, structure, current and food.
We have all heard the line, “Find the bait-find the fish.” It sounds so easy but so many anglers ignore this simple advice in locating blackmouth. Blackmouth salmon are voracious feeders and will be looking for sand lance (candlefish) or herring to fill their bellies year around in Puget Sound.
The sand lance, which are also known locally as “candlefish,” because pioneers used to dry them and make candles out of them due to their high oil content are an ecologically important forage fish throughout Puget Sound where they school in many bays, banks and inlets. Sand lance are important food for young salmon who crave the high oil content; 35% of juvenile salmon diets are composed of sand lance and blackmouth salmon depend on sand lance for 60% of their diet. Sand lance spawning occurs at high tide in shallow water on sand-gravel beaches. Sand lance will also use sandy beaches for spawning. Knowing when and where this food source is will directly reflect on locating winter blackmouth.
Herring can be located at resting spots that are dictated by the current. As in river fishing, bait will be pushed into the lee of a current flow behind points, islands and land masses. The same is true in Puget Sound, knowing the position of the tide will allow you to find the best location to find baitfish and salmon feeding on it.
Trolling a downrigger is in my opinion the best method for consistently hooking blackmouth. I spend much of the winter season employing this method of fishing. I run 3 Hi Performance Scotty 2106 downriggers onboard Salt Patrol my 27ft North River O/S. Being able to cover lots of water with your tackle at a controlled depth is an extremely effective way to fish for winter chinook that like to inhabit the deep waters of Puget Sound.
My rod & reel setup is a Shimano Tekota-A 600 Line counter reel matched with a G. Loomis E6X 1265 moderate action rod. The reels are spooled up with 30-pound test mono main line. Yes, downrigger fishing is the one fishery that I still run mono line for.
New from Yakima Bait is the Spinfish bait-holding lure, representing a new design in combining lure-and-bait to produce more and bigger salmon. The SpinFish features a pull-apart fillable bait chamber with a scent-dispersing design. When trolled behind a downrigger this lure will produce a vibrating, spinning, wounded-baitfish action that salmon can’t resist.
I was lucky to get to test the prototypes for the Spinfish last winter. My first experience with the Spinfish started with targeting winter blackmouth out of Port Townsend located on the northern part of Puget Sound. We ran the Spinfish behind 11” rotating flashers and medium size Fish Flash and had very good success on blackmouth up into the mid-teens. The strike on the Spinfish is not like on light tap on a bait bite. The blackmouth will hit the Spinfish hard, run a bunch of line out of the reel and then race to the surface for the rest of the fight. Several times the rod tip would be in the water when we went to take the rod out of the holder.
To ready the Spinfish you just pull apart the body and fill with any bait including tuna, herring or sardines. I had the best results using canned Chicken of the Sea Tuna (packed in oil). Pour the canned tuna into a plastic container with the all the oil in the can. At this point I will add scents from Pro-Cure. Mix in some Bloody Tuna or your choice scent and mix and you’re ready to charge the Spinfish body. Pack the Spinfish body with tuna and put the two parts back together.
I rig my Spinfish 25-40 inches behind a Fish Flash or 35-45 inches behind rotating flashers. My setup last year was to tie two 4/0 Mustad octopus hooks close together on 30lb Seaguar fluorocarbon leader and add one glow bead above the top hook to act as a ball bearing. Slide the Spinfish on the leader and tie to swivel and then attach to the Fish Flash or rotating flasher and you’re ready to fish.
The SpinFish can be rigged to spin clockwise or counterclockwise and unlike other bait holding lures, it needs no rubber bands to keep the lure together. The precisely drilled sent holes in the Spinfish will disperse a sent pattern into the water and salmon will follow the scent trail back to the lure. Just like any lure bring your gear up every 20 minutes and check it for shakers (undersize salmon) and re-charge the Spinfish body with fresh tuna.
I normally have 4-5 Spinfish loaded with different bait scents and ready to swap out each time I check my gear. Blackmouth bites windows are short and you don’t want to waste time during the prime bite times rigging tackle.
The new SpinFish comes in two sizes, a three inch and a four-inch version, that now both come fully rigged and ready to fish. The three-inch size comes in 20 of the hottest colors Yakima Bait producers. The four-inch version comes in 10 proven fish-attracting colors. All the Spinfish colors are coated in UV blackmouth catching finishes.
Blackmouth like to do their feeding where the bait is. They are aggressive feeders and tend to feed when the current is minimal to expend as little energy as possible. That means the best time to catch them is when you’re fishing in the right current flow or lack of current movement. You may have heard that the best fishing for blackmouth is one to two hours before or after a tide change. Really its right before or right after a current change as that’s when the water goes slack and the fish will expend the least energy finding baitfish.
Trolling downriggers I spend most of my time eyes glued to my Lowrance HDS Live sonar screen watching for bait or fish feeding near the bottom and adjusting my rigger depth to match what I’m seeing on the screen. I like to run my Spinfish about 1-2 ft. just off bottom where blackmouth generally feed.
I troll bracketing the water depth in the area I’m fishing by adding depth on each pass until I hook a fish or locate bait holding. I then I try to stay with the bait or fish marks and keep pounding them with the Spinfish until I get a hookup or run the fish off the bait. Then its back on the troll, eyes again glued to the sonar and the rod tips.
Add the new Yakima Bait Spinfish to your blackmouth tackle arsenal now so you’re ready for the upcoming winter season.
For more information on the Yakima Bait SpinFish visit: www.yakimabait.com
Capt. John Keizer